The new Kebidu AK-K200812 tortoise shell copy remote control adopts SA901B main control chip, supports online programming, can be programmed repeatedly, built-in EEPROM, can copy other ordinary remote control with the same frequency, can clear codes and learn codes at any time, easy to use, and fast.
These remotes can be used for a number of purposes including;
* Garage Door Remotes
* Automatic Gate Remote
* Car Remote Control
* Lighting Control
* Smart Home Automation Remote Control

Kebidu AK-K200812 features:

(1) Working frequency: 315 MHz / 433.92 MHz (special frequency can be customized according to customer requirements);
(2) Power supply scheme: DC3V (button battery 2032) power supply;
(3) Standby current: less than 0.15uA;
(4) Good selectivity and stray radiation suppression ability;
(5) Good local vibration suppression ability;
(6) Temperature range: -20-70℃, it can work normally even in harsh environmental temperature;
(7) Product size: 60*37.4*11.4 (mm) (including shell);
(8) Product weight: 14.39g (including shell).

Set Up:

To clear the code (first step when receiving the control) -> press at same time the button to open and close. Hold during 3 seconds until it flash 3 times, then, keeping pressed both buttons, release one of them and press quickly 3 times the released button. It must flash 3 times. Do the same for the other button you want to code. To save the new code -> press the button you want to code until it flash, then, press the old button from the remote you want to clone, and wait until the new remote flash. Do the same for the other button you want to clone. It should work. It the clone is successful, when pressing the open it should flash once. Same for the closing.

Specifications:
Normal working voltage DC2.4V—3V
Emission current <20mA
Launch distance> 25 meters

Delivered from Auckland.